# Account settings and two-factor authentication

> Update your profile and email, manage how you sign in, turn on two-factor authentication, and sign out other devices.

Account settings are about you, not your company. Your name, email, password, and security settings follow you into every workspace you belong to. Think of your account as your ID badge and each workspace as an office building it opens.

**Where to find it:** select your name at the bottom of the sidebar, then choose **Account settings**.

The page has eight sections, from top to bottom: **Profile**, **Email address**, **Sign-in methods**, **Phone number**, **Two-factor authentication**, **Active sessions**, **Email notifications**, and **Danger zone**.

## Update your profile

Your name and picture are what teammates see across Hourzero, for example in the members list.

1. Under **Profile**, select **Upload picture** (or **Change picture** if you already have one).
2. Choose a JPG, PNG, or WebP image up to 5 MB. The picture updates right away.
3. Edit **Name** if needed.
4. Optional: fill in **Helpdesk display name**, such as `Maya from Support`. Customers see it on your replies in a conversation and when a ticket is assigned to you. Leave it blank to use your **Name**.
5. Select **Save profile**. The button only becomes active after you change your name or Helpdesk display name.

To go back to your initials, select **Remove** next to your picture.

## Change your email address

You use this email to sign in, so Hourzero checks the new address before switching.

1. Under **Email address**, type the new address in **New email address**.
2. Select **Send code**. Hourzero emails a code to the new address.
3. Enter the code from that email.
4. Select **Verify email**. You see **Email address updated**, and you sign in with the new address from now on.

> [!NOTE]
> Nothing changes until you select **Verify email**. If you close the page after sending the code, your old address stays in place. Select **Cancel** to start over with a different address.

## Manage how you sign in

The **Sign-in methods** section shows each way you can get into your account, with a badge such as **Enabled**, **Not set**, **Connected**, or **Not connected**.

### Change or create a password

1. Under **Sign-in methods**, select **Change password**. If you've only ever signed in with Google, the button says **Create password** instead.
2. If you're changing a password, enter your **Current password**.
3. Enter a **New password** between 8 and 128 characters, then type it again in **Confirm password**.
4. Leave **Sign out every other device after changing the password.** ticked if you want to be sure nobody else stays signed in.
5. Select **Change password** (or **Create password**).

Hourzero checks new passwords against lists of passwords exposed in past data breaches and rejects ones that appear there. The check uses a short, scrambled code made from your password, never the password itself.

### Connect or disconnect Google

- To sign in with your Google account, select **Connect** next to **Google** and follow Google's steps.
- To stop using Google, select **Disconnect**.

> [!IMPORTANT]
> You always need at least one way to sign in. If Google is your only method, **Disconnect** is greyed out. Create a password first, then disconnect Google.

If the Google row says Google sign-in isn't configured, it isn't available on your Hourzero setup and there's nothing to connect.

## Add a phone number

Adding a verified phone number is optional.

1. Under **Phone number**, select your country code from the list. You can search by country name or code.
2. Type your number.
3. Select **Send code**. Hourzero texts you a code.
4. Enter the code and select **Verify number**. A **Verified** badge appears.

To replace it later, type a new number and select **Change number**. To delete it, select **Remove**.

> [!NOTE]
> This number is only for your account. It doesn't connect WhatsApp or text messages to your agent, and it isn't used as a second sign-in step.

If the section says phone verification isn't available yet, it hasn't been set up for your Hourzero installation, and you can skip it.

## Turn on two-factor authentication

Two-factor authentication (2FA) adds a second lock to your account. After you enter your password, Hourzero also asks for a short code from an app on your phone. Someone who steals your password still can't get in without your phone.

1. **Password**: Sign in with your email and password as usual.
2. **Code**: Open your authenticator app and type the current code.
3. **Signed in**: Tick Trust this device to skip the code here for 30 days.

You need an authenticator app, such as 1Password, Google Authenticator, or Authy.

1. Under **Two-factor authentication**, select **Enable 2FA**. The **Set up an authenticator app** window opens.
2. If you have a password, type it in **Confirm your password**.
3. Select **Continue**. A QR code appears.
4. Open your authenticator app, add a new account, and scan the QR code. The app starts showing a code for Hourzero.
5. Under **Backup codes**, select **Copy codes** and save them somewhere safe, away from your phone. A password manager or a printed sheet in a drawer both work.
6. Type the current code from your app in **Authenticator code**.
7. Select **Verify and enable**. You see **Two-factor authentication enabled**.
8. Select **I saved my codes** to close the window.

The **Authenticator app** row now shows **Enabled**.

> [!WARNING]
> Save your backup codes before you close the window. If you lose your phone and don't have a backup code, you can't finish signing in with your password.

2FA protects sign-ins with your email and password. If you sign in with Google, your Google account's own security settings protect that sign-in.

### Sign in with two-factor authentication

1. Sign in with your email and password.
2. On the **Two-factor authentication** page, enter the code from your authenticator app in **Authenticator code**.
3. Keep **Trust this device for 30 days** ticked on your own computer. Untick it on a shared or public computer.
4. Select **Verify**.

### Use a backup code

If you don't have your phone, select **Use a backup code** on the **Two-factor authentication** page and type one of your saved codes. Each backup code works only once, so cross it off after you use it.

## Get new backup codes

Hourzero can't show your old backup codes again. If you've used most of them or lost the list, create a fresh set.

1. Under **Two-factor authentication**, select **Backup codes**.
2. Type your password in **Confirm your password**, if asked.
3. Select **Generate codes**. The new codes appear.
4. Select **Copy codes**, save them, then select **Done**.

> [!IMPORTANT]
> Generating new codes switches off every old code immediately. Replace your saved copy so you don't try an old one later.

## Turn off two-factor authentication

1. Under **Two-factor authentication**, select **Disable**.
2. Type your password in **Confirm your password**, if asked.
3. Select **Disable 2FA**. Password sign-ins no longer ask for a code.

## Sign out other devices

**Active sessions** lists every browser and device signed in to your account, such as "Chrome on macOS", with when it was last active. Your current browser has a **This device** badge.

- To sign out one device, select **End session** next to it.
- To sign out everywhere except here, select **End other sessions** at the top of the section.

Ending a session only signs that device out. It doesn't change your password or delete anything.

> [!TIP]
> If you signed in on a shared computer or lost a laptop, end its session here, then change your password.

## Choose which emails you get

**Email notifications** has a switch for each kind of email you can turn off:

- **Tips and onboarding:** a welcome, agent milestones, and a short series of feature tips.
- **Helpdesk:** an email whenever a Helpdesk ticket is assigned to you, whether a teammate assigned it or the team's assignment method did.

**Billing and credits** emails are always on, because they're about payments and plan limits.

Turning an email off only stops the email. The same notice still appears under the bell next to your name at the bottom of the sidebar. These choices belong to your account, so they apply in every workspace.

## Delete your account

Deleting your account is permanent. It removes your account, your personal workspace with all its agents, and your personal data. Team workspaces you belong to stay in place for everyone else.

Before you start:

- **Hand over any team workspace you own alone.** If you're the only owner of a team workspace, make someone else the owner or delete that workspace first. Otherwise Hourzero stops you with a message like "Transfer ownership or delete Acme before deleting your account." See [Members and invitations](https://hourzero.dev/docs/workspace-management/members).
- **Cancel any paid plan on your personal workspace** under **Workspace Settings → Billing**.

> [!WARNING]
> Deleting your account doesn't cancel a subscription for you. Cancel the plan in **Billing** first so you aren't charged again. See [Billing](https://hourzero.dev/docs/workspace-management/billing).

To delete your account:

1. Under **Danger zone**, select **Delete account**.
2. In the **Delete account permanently** window, type your email address exactly as shown.
3. Enter your **Password**, if you have one.
4. Select **Delete account**. Hourzero signs you out and takes you to the sign-in page.

If you only want to stop working in one team workspace, open **Workspace Settings → Members** in that workspace and choose **Leave workspace** from the menu on your own row. Your account stays as it is.

## Common questions

### I changed workspaces. Do I need to set up 2FA again?

No. 2FA, your password, and your profile belong to your account, so they apply in every workspace.

### My authenticator code is rejected. What should I check?

Make sure you're using the Hourzero entry in your app and typing the code currently shown, not one that has expired. Check that your phone's clock is set to update automatically. If it still fails, use a backup code.

### Can I see my backup codes again?

No. Generate a new set under **Two-factor authentication → Backup codes**. The old set stops working.

### How do employees sign in with our company account?

That's single sign-on, which a workspace admin sets up for the whole company. See [Single sign-on](https://hourzero.dev/docs/security/single-sign-on).

## Next steps

- [Members and invitations](https://hourzero.dev/docs/workspace-management/members): Invite teammates and choose what each person can do.
- [Single sign-on](https://hourzero.dev/docs/security/single-sign-on): Let employees sign in with your company account.
- [Workspaces and agents](https://hourzero.dev/docs/workspace-management/manage): Switch, create, rename, or delete workspaces.
